September 14th, 2023
Welcome, passionate skateboarders and enthusiasts, to our ultimate guide on how to fix squeaky skateboard trucks!
If you have ever wondered why my skateboard squeak or how to fix a squeaky bushings skateboard, you have come to the right place! With years of experience in the industry, we understand the frustration that comes with squeaky trucks.
Squeaky trucks can disrupt your riding experience, distract you from landing tricks, and even draw unwanted attention. But fear not, as we’re here to share our vast knowledge and provide you with comprehensive instructions to silence those annoying sounds once and for all.
Throughout this blog post, we’ll delve into each component, providing you with technical details, step-by-step instructions, and insider tips. By following our guidance and applying the appropriate solutions, you’ll not only eliminate squeaky noise but also enhance your skateboarding performance.
Let’s dive into the following sections, where we’ll explore each component individually and guide you through the process of fixing squeaking sound skateboard trucks.
What To Fix?
Now, grab your skate tool, put on your favorite deck, and let’s embark on this journey together to conquer the annoying noise and elevate your skateboarding experience to new heights!
Bearings play a crucial role in ensuring smooth and silent skateboard rides. Over time, dirt, dust, and debris can accumulate in the bearings, causing friction and leading to squeaky sounds. To fix this issue, follow these steps:
- Remove the wheels from your skateboard using a skate tool.
- Carefully pop out the bearings using a bearing press or a skateboard tool.
- Clean the bearings by using a solvent specifically designed for skateboard bearings. Spin the bearings in the shavings of bar soap to remove dirt and debris.
- Once cleaned, dry the bearings thoroughly.
- Apply a few drops of lubricant, such as skateboard bearing oil, to each bearing.
- Reassemble the bearings into the wheels, ensuring they are seated properly.
- Tighten the axle nuts firmly but not overly tight to avoid excessive friction.
2. Skateboard Truck’s Bushings
The bushings in your skateboard trucks provide cushioning and allow for a comfortable ride. When they become dry or worn out, they can start squeaking. Here’s how to address this issue with routine maintenance:
- Remove the trucks from the skateboard deck using a skate tool.
- Take out the bushings from the trucks. Inspect them for signs of wear, cracking, or dryness.
- If the bushings are worn out or dry, replace them with new ones that match your riding style and weight.
- Apply a small amount of skateboard bushing lubricant to the new bushings.
- Reinstall the trucks onto the skateboard deck and tighten the mounting hardware securely.
3. Riser Pads
Riser pads are thin plastic or rubber pads that sit between the skateboard deck and the trucks. They help reduce vibrations and absorb shocks. Squeaks can occur when the riser pads rub against the deck or the trucks. To fix this issue with a simple solution:
- Remove the trucks from the skateboard deck.
- Inspect the riser pads for any signs of wear or damage. Replace them if necessary.
- Apply a small amount of skateboard wax or silicone lubricant to the contact surfaces of the riser pads.
- Reinstall the trucks onto the skateboard deck, ensuring the riser pads are properly aligned.
Squeaky skateboard wheels can be caused by a variety of factors, including worn-out bearings or dried-out urethane. To address this issue:
- Remove the wheels from the skateboard using a skate tool.
- Inspect the wheels for signs of wear, flat spots, or uneven tread.
- Clean the wheels thoroughly with soap and water to remove any dirt or debris.
- If the wheels are worn out or damaged, replace them with new ones of the appropriate size and hardness.
- Reinstall the wheels onto the trucks, ensuring they are seated properly and the axle nuts are tightened securely.
5. Pivot Cups and Screws
The pivot cups and screws in your skateboard trucks can also contribute to squeaking. Here’s how to fix this issue:
- Remove the trucks from the skateboard deck.
- Inspect the pivot cups for wear, cracking, or dryness. If necessary, replace them with new ones.
- Apply a small amount of skateboard wax or silicone lubricant to the pivot cups and screws.
- Reinstall the trucks onto the skateboard deck, ensuring the pivot cups are seated properly and the screws are tightened securely.
Congratulations! You’ve embarked on a journey to conquer the squeaky skateboard trucks that have been hindering your skateboarding experience. By delving into the intricacies of each component, including the bearings, bushings, riser pads, wheels, pivot cups, and screws, you’ve equipped yourself with the knowledge and tools necessary to eliminate those annoying squeaks.
Remember, skateboard maintenance is an ongoing process. Regularly inspecting and maintaining your trucks will help prevent future squeaks and ensure optimal performance. Additionally, keeping your skateboard clean and free from debris will prolong the lifespan of your components and contribute to a smoother ride.
As you put your newfound knowledge into practice, don’t hesitate to experiment and explore different setups that align with your riding style and preferences. Skateboarding is a personal journey, and finding the perfect setup is all part of the adventure.
Now, armed with your trusty skate tool and a deeper understanding of skateboard truck maintenance, go forth and enjoy smooth, silent rides. Embrace the freedom, creativity, and pure joy that skateboarding brings.
Keep pushing the limits, mastering new tricks, and inspiring others with your unique style. May your future skate sessions be filled with epic tricks, endless progression, and the sweet sound of silence! Happy skateboarding!
Shane Hill is a skateboard performer and trains skateboarding in various academies in Australia. He is passionate to teach skateboarding to beginners and has dedicated his career to this sport.